AB Cable Stripper

Photo Gallery

Links for this product

Support for this product
Info about selling this product

View Technical specification

• Adjust V-Block
  6 = RG6
  8 = RG58
  9 = RG59/62

   

• Adjust blade’s depth
  – counterclockwise to larger cables
  – clockwise to smaller cables

   

• Stripping Length
  D = 4mm
  D = 6mm (preset)
  D = 8mm
  D = 12mm

Stripping cable

1. The V-block is reversible. Use hex wrench to push the V-block out of the housing.
2. Press the knurled portion on the upper jaw to open the stripper’s jaws.
3. Insert the cable you want to strip through the V-block until the cable reaches the V-shaped cable guide. Then release the upper jaw to close the jaws.
4. Insert your index finger into the strippers finger ring, turn the stripper clockwise 1-4 times. The cable’s insulation is cut while you turn the stripper.
5. Open the jaws and remove the cable. Pull away the outer jacket and dielectric to expose the inner conductor.